Whetstone Grit Guide: Which Grit Does What
Grit numbers on whetstones tell you how fine the abrasive is. Lower numbers cut faster and leave a rougher edge. Higher numbers cut slower and leave a finer, more polished edge. Here is what each range is used for.
Coarse: about 120 to 600
Coarse stones remove metal quickly. They are for repair work: chips, a broken tip, or an edge so dull that a medium stone would take far too long. They are not for routine sharpening, since every pass removes a lot of steel.
Medium: about 800 to 2000
This is the workhorse range, and a 1000 grit stone is the most common starting point. A medium stone sets a new edge on a dull knife that has no damage. For many kitchen knives, a clean edge off a 1000 grit stone is sharp enough for daily cooking.
Fine: about 3000 to 8000
Fine stones refine and polish the edge left by the medium stone. The edge feels smoother and often lasts longer between sharpenings. 5000 or 6000 grit is a common finishing stone for kitchen knives.
Polishing: about 10000 and up
Very fine stones produce a mirror finish. They suit straight razors, single bevel slicing knives and people who enjoy the process. Most home cooks will not notice a difference above 6000 in daily use.
Why grit numbers do not match across brands
Japanese stones usually use the JIS scale and many Western stones use the FEPA scale or the maker's own rating. Different binders and abrasives also cut differently. A 1000 from one maker can feel coarser or finer than a 1000 from another, so treat the numbers as a general guide.
Soaking stones and splash and go stones
- Soaking stones need to sit in water, often for around 10 minutes, before use. Follow the maker's instructions.
- Splash and go stones only need water on the surface. Leaving some of them in water for long periods can damage them.
Keep your stones flat
Stones wear unevenly, usually forming a dip in the middle. A dished stone makes a consistent angle hard to hold. Flatten stones regularly with a flattening plate or a coarse diamond plate.
A simple first setup
- A 1000/6000 combination stone covers sharpening and finishing in one stone.
- Add a coarse stone around 400 only when you need to fix chips.
- Keep a flattening plate and a damp towel under the stone so it does not slide.
When to hand it to a professional
Chips, broken tips, single bevel knives and expensive knives you do not want to practice on are good jobs for a professional. Find a sharpener by city, or see the Japanese knife sharpening guide if your knife is Japanese.
Find Professional Knife Sharpeners Near You
Search the directory of 6,600+ knife sharpening professionals across the United States. Find mobile services, drop-off locations, and specialty sharpeners in your area.
Related Articles
How Japanese knives differ from European knives, single vs double bevel, typical angles, and the questions to ask a sharpener before you hand over a gyuto or yanagiba.
Read moreWhetstones, guided systems, pull-through and electric sharpeners, belt grinders and water cooled wheels compared: how each works, what each does well and what to watch.
Read moreWhen sharpening your own knives makes sense, when to use a professional, what each costs in time and money, and the tools worth buying if you sharpen at home.
Read more